BHNSC - JOINT SEALANT 9020,PART A
- MSDS: BHNSC
- Manufacturer: KOCH MATERIALS COMPANY (FORMERLY ALLIED CHEMICALS)
- Product Name: JOINT SEALANT 9020,PART A
- National Stock Number: 8030-00N010423
Product Identification
Product ID:JOINT SEALANT 9020,PART A
MSDS Date:05/27/1986
FSC:8030
NIIN:00N010423
MSDS Number: BHNSC
Responsible Party
Emergency Phone: 316-832-6777
Info Phone: 316-832-6777
Cage: 0TAB0
Contractor
Telephone: 918-968-3541
Cage: 0TAB0
Ingredients
SODIUM BICHROMATE (SARA III)
CAS: 10588-01-9
RTECS: HX7700000
Fraction By Weight: <25%
OSHA PEL 0.1 PPM CRO3;CEILING
ACGIH TLV: 0.05 MG CR/M3; 9192
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <4%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
RESIN PLASTICIZER
CAS: 68515-40-2
Fraction By Weight: <17%
OSHA PEL N/K
ACGIH TLV: N/K
CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: <43%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9192
SULFUR
CAS: 7704-34-9
RTECS: WS4250000
Fraction By Weight: <2%
OSHA PEL N/K
ACGIH TLV: N/K
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: <15%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PERMANENT EYE INJURY IS POSSIBLE IF
PRODUCT COMES IN CONTACT WITH EYE.SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:SODIUM BICHROMATE:SUFFICIENT EVID FOR
CARCIN IN HUM,SUFFICIENT EVID FOR CARCIN IN ANIMALS (IARC
1987).CHROMIUM (SEE SUP)
Effects of Overexposure:EYES:MAY CAUSE IRRITATION AND PERMANENT EYE
INJURY.SKIN:MAY CAUSE IRRITATION.PROLONGED OR REPEATED CONTACT MAY
CAUSE CHROME SORES.INGESTION:CAN CAUSE DIGESTIVE SYSTEM
BURNS.INHALATION:VAPOR CAN CAUSE IRRITATION.
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:EYES:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN
WHILE HOLDING THE EYELIDS OPEN.GET MEDICAL ATTENTION.SKIN:WASH WITH
SOAP AND WATER OR USE WATERLESS HAND CLEANER.DO NOT USE SOLVENTS OR
THINN ERS TO CLEAN THE SKIN.INGEST:IF VICTIM IS CONSCIOUS GIVE
LIQUIDS.INDUCE VOMITING.GET MED ATTENTION.INHAL:MOVE TO SOURCE OF
FRESH AIR.IF BRTHNG IS DFCLT,GIVE O*2.IF BRTHNG HAS STOPPED GIVE
ARTF RESP.
Fire Fighting
Flash Point Method:OC
Flash Point:445F FOR RESIN
Extinguishing Media:USE DRY CHEMICAL,WATER FOG,FOAM,CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS MAY
INCLUDE CARBON MONOXIDE,CARBON DIOXIDE,OXIDES OF
SULFUR,ALDEHYDES,AND OTHER UNIDENTIFIED COMPOUNDS.
Accidental Release
Spill Release Procedures:DIKE OR CONTAIN SPILL WITH EARTH,FLOOR
DRY,SAND,ETC.PUMP LIQUID TO CONTAINERS OR STORAGE VESSEL.SOAK UP
RESIDUE WITH ABSORBENT MATERIAL.SCOOP CONTAMINATED ABSORBENT AND
DIKING MATERIAL INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:STORE BETWEEN 60F AND 100F.STORAGE
BELOW 60F WILL NOT DAMAGE THE PRODUCT,HOWEVER,IT MUST BE WARMED
BEFORE USE.
Other Precautions:N/K
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NORMAL VENTILATION IS USUALLY ADEQUATE.
Protective Gloves:IMPERV GLOVES SUCH AS NEOPRENE OR RUBBER
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR A PROTECTIVE APRON IF REPEATED CONTACT
IS LIKELY.
Work Hygienic Practices:N/K
Supplemental Safety and Health
BP:734F FOR THE RESIN PLASTICIZER.VP:0.5 MMHG @ 392F FOR THE RESIN
PLASTICIZER.EXPLAN OF CARCIN:AND CERTAIN CHROMIUM COMPOUNDS:KNOWN
HUMAN CARCINOGEN (NTP 1985).
Chemical Properties
Boiling Pt:B.P. Text:SEE SUPP
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:SEE SUPP
Spec Gravity:1.66 (WATER=1)
Solubility in Water:SLIGHT
Appearance and Odor:HEAVY PASTE.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZERS.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,OXIDES
OF SULFUR,ALDEHYDES,AND OTHER UNIDENTIFIED COMPOUNDS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.